Сообщений в теме: 35

[svislochanin]

тюнер ребутните

[muerte5]

Если про ресивер, не раз пробовал... не помогает

[svislochanin]

https://forum.zargac...mgcamd/?p=56377

меняйте все листы

[muerte5]

ignore.list, priority.list, replace.list поменял, все так же

[svislochanin]

mg_cfg покажите

[muerte5]

Скрытый текст

# EMM messages

#    00 don't show any EMMs (default)

#    01 show only valid EMMs

#    02 show valid and bad EMMs with complete data display

M: { 00 }

 

# ECM messages

#    00 don't show anything about ecm

#    01 normal mode, show pids processed, decoded ecm and cw

#    02 verbose mode, show valid and bad ECMs with data

C: { 01 }

 

# AU

#    00 disable, no emm pids processed

#    01 enable, emm pids always processed for soft-au and shared cards

#    02 auto, emm started only if channel cant be decoded

#    03 process emm pids for network cards update only

A: { 00 }

 

# key update (sum 01 or 02 with 04)

#    01 update only new keys, default setting

#    02 update all keys (used for valid PMK checking)

#    04 enable TPS au

#    + tps au pid

U: { 00 } 

 

# config files folder (softcam, autoroll, ignore/priority)

#    00 files in /var/keys

#    01 files in /tmp

T: { 00 }

 

# network mode, use summ for several clients

#    00 no network (default)

#    01 newcamd netclient

#    02 radegast netclient

#    04 camd3 netclient

#    08 gbox netclient

G: { 01 }

 

# network retry, use summ for several options

#    00 disable

#    01 retry every new ecm

#    02 try to connect to offline shares every Q: seconds

#    04 try to detect and fast reconnect to lost (and not used atm) server

#    + XX messages number and YY seconds to reconnect

#    mg will reconnect to server, if no answer to last XX ecm/keepalive or

#    if no answer for last ecm or keepalive sent for YY seconds

#    set to 0 to disable

N: { 07 } 4 30

 

# network ecm timeout in seconds

K: { 03 }

 

# newcamd dead routes connect retry, sec

Q: { 15 }

 

# network shares priority

# 00 gbox, newcamd, radegast, camd3 (default)

# 01 camd3, radegast, newcamd, gbox

# 02 newcamd, camd3, gbox, radegast

P: { 02 }

 

# on screen display type

#    00 No OSD (default)

#    01 neutrino

#    02 enigma

#    03 relook

#    + user password for http auth

O: { 00 } username password

 

# on screen display Options, summ of:

#    01 show emu ecm 

#    02 show network shares messages

#    04 show decoding failed / fta

#    08 show emm keys update

#    + web port to use for osd

S: { 03 } 80

 

# Log option, summ of:

#    00 off

#    01 network udp log

#    02 log to console

#    04 file, appended ! delete it by yourself, before it eat all your hdd

#    + IP udp-port log-file-name

L: { 01 } 127.0.0.1 514

 

# keep ecm cache, seconds

# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,

# for openbox/elanvision users with remote shares make sense to set it higher than default value, 

# to not hammer cards while timeshifting or playing crypted recordings.

E: { 15 }

 

# cache option, summ of:

#    00 Off (default)

#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list

#    02 Ecm data cache, remember CW for (E:) time 

#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart

H: { 00 }

 

# reread files, summ of: 

#    00 No (default)

#    01 reread config file on channel change (including priority and ignore, but not replace/cache)

#    02 reread SoftCam.Key on channel change

#    04 reread SoftCam.Key if file changed

R: { 04 }

 

# debug, summ of

# 00 off (default)

# 01 debug ecm

# 02 debug emm

# 04 debug network ecm

# 08 debug network emm

# 16 debug network login

# 32 show mem/cpu stats every 1 min

# 64 add timestamp to log messages

D: { 83 }

 

# box type

# 00 autodetect, change only if you think wrong type detected.

# 12 openbox sh4

B: { 12 }

 

# map all 180x nagra caids to 1801 

# default is 01 

F: { 00 } 

[svislochanin]

переходите в чат онлайн в биллинге

[kvictor]

Такая же проблема на трех ресиверах GI 8120 работали на сервере ru724 и все разом встали. Если выявили причину, огласите пожалуйста.

[alserg]

Jan 14 07:34:14 192.168.1.2  ECM to newcamd ru724.cserver.tv:3001 
Jan 14 07:34:15 192.168.1.2 [mg0] <- CW from newcamd ru724.cserver.tv:3001 (1326ms) 
Jan 14 07:34:15 192.168.1.2 [mg0] 1326 msec -- Thu Jan 14 07:34:55 2016 
Jan 14 07:34:15 192.168.1.2 ===== Viaccess ECM on CaID 0x0500, pid 0x0fa8 ====== 
Jan 14 07:34:15 192.168.1.2 prov: 040600 
Jan 14 07:34:15 192.168.1.2 cw0:0 67 4B 67 19 75 61 E6 BC 
Jan 14 07:34:15 192.168.1.2 cw1:0 F2 4D 21 60 F6 B2 30 D8 

сервер работает в штатном режиме

причина не в этом,проверьте настройки

если не поможет,в онлайн в биллинге переходите

[kvictor]

newcamd keep alive: 300, incoming port: 12000
[newcamd] Connecting to ru724.cserver.tv:3001...
[mgcam] emm thread started
[newcamd] Connecting to ru724.cserver.tv:2001...
[newcamd] Connecting to ru724.cserver.tv:3002...
[newcamd] Connecting to ru724.cserver.tv:3003...
[newcamd] Connecting to ru724.cserver.tv:3005...
[newcamd] Connecting to ru724.cserver.tv:3057...
got 109 cmd 9F
[mg0] namespace 1682FD4 t-id 7 on-id 70
[mg0] descramble on 1, source 0
[mg0] service 2BE index 0 pmt pid 66 (1), pids: video 0x00CA, audio 0x012E
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x106A ProvID: 040620
[mg0] No viaccess key(s) found for id 40620 keynr 08
[mg0] network can't decode
[mg0] pid 0x106A failed to decode.
[newcamd] Connection to ru724.cserver.tv:3001 failed (-685606924ms)
[newcamd] Connection to ru724.cserver.tv:2001 failed (-685606924ms)
[newcamd] Connection to ru724.cserver.tv:3002 failed (-685606925ms)
[newcamd] Connection to ru724.cserver.tv:3003 failed (-685606925ms)
[newcamd] Connection to ru724.cserver.tv:3005 failed (-685606925ms)
[newcamd] Connection to ru724.cserver.tv:3057 failed (-685606925ms)
Поменял сервер на 60 т.е. на fynoi87h.xconnect.info заработало для Екатеринбурга может конкретный сервер укажите.

[kvictor]

Теперь:
prov: 040620
cw0:0 54 E0 86 BA 67 F2 89 E2
cw1:0 10 5F B3 22 6C E3 D2 21
[mg0] -> ECM to newcamd fynoi87h.xconnect.info:3001
[mg0] <- CW from newcamd fynoi87h.xconnect.info:3001 (740ms)
[mg0] 740 msec -- Thu Jan 14 21:31:10 2016
===== Viaccess ECM on CaID 0x0500, pid 0x106a ======
prov: 040620
cw0:0 54 E0 86 BA 67 F2 89 E2
cw1:0 C5 EE 54 07 D8 08 9D 7D
[mg0] -> ECM to newcamd fynoi87h.xconnect.info:3001
[mg0] <- CW from newcamd fynoi87h.xconnect.info:3001 (764ms)
[mg0] 764 msec -- Thu Jan 14 21:31:20 2016
===== Viaccess ECM on CaID 0x0500, pid 0x106a ======
prov: 040620
cw0:0 06 B7 0B C8 7A 2B F7 9C
cw1:0 C5 EE 54 07 D8 08 9D 7D

[lv_pavel]

Все сервера в биллинге рабочие, что говорит пинг с предыдущего и ваше местоположение Россия?

[svislochanin]

kvictor

в логе же нет проблем

[d3276]

в онлайн перейдите,дам готовый плагин

Zdravstvuite budte dobri daite gotoviy plagin wicard.

[lv_pavel]

какой эмулятор у вас стоит?

[d3276]

какой эмулятор у вас стоит?

u menya xcamd stoit