Перейти к содержимому


Фотография
- - - - -

Настройка Extrend ET5000

et5000 mgcamd

  • Закрытая тема Тема закрыта
Сообщений в теме: 20

#1 Purgen4ik

Purgen4ik

    Новичок

  • Пользователи
  • PipPip
  • 10
  • 10 сообщений
  • 0 thanks

Отправлено 07 November 2013 - 23:59

Здравствуйте. Проблема следующая:
В шаринге я профан и у меня не выходит настроить ресивер так, чтобы он работал корректно. Конкретнее:
Поставил mgcamd, настроил по инструкции, но он не работает, лог получить не могу, и вообще ничерта не понятно.
имидж OpenPLI 3.0, mgcamd 1.35.
Заранее извиняюсь, если накосячил с темой и прошу помощи!
PS Оплатил и настройки получил, но...

Сообщение отредактировал Purgen4ik: 08 November 2013 - 17:12


#2 alserg

alserg

    Super Moderator

  • Модераторы
  • 267
  • 17426 сообщений
  • 44 thanks

Отправлено 08 November 2013 - 08:37

настройки показывайте

45948db45b33.gif

 

 

#3 svislochanin

svislochanin

    Super Moderator

  • Модераторы
  • 283
  • 12038 сообщений
  • 6 thanks

Отправлено 08 November 2013 - 11:03

Здравствуйте. Проблема следующая:
В шаринге я профан и у меня не выходит настроить ресивер так, чтобы он работал корректно. Конкретнее:
Поставил mgcamd, настроил по инструкции, но он не работает, лог получить не могу, и вообще ничерта не понятно.
имидж OpenPLI 3.0, mgcamd 1.35.
Заранее извиняюсь, если накосячил с темой и прошу помощи!
PS Оплатил и настройки получил, но...


mg_cfg показывайте
Dreambox 800 se
4.8е, 13.е, 19е, 36.е, 75е, 0.8w, 4w, 5w

#4 Purgen4ik

Purgen4ik

    Новичок

  • Пользователи
  • PipPip
  • 10
  • 10 сообщений
  • 0 thanks

Отправлено 08 November 2013 - 16:41

mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 00 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 2 4

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 10 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 04 }

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 36000 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 00 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 2 4

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 10 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 04 }

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 36000 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 06 }

Сообщение отредактировал svislochanin: 08 November 2013 - 16:49


#5 svislochanin

svislochanin

    Super Moderator

  • Модераторы
  • 283
  • 12038 сообщений
  • 6 thanks

Отправлено 08 November 2013 - 16:50

пробуйте так, поправил вам
Dreambox 800 se
4.8е, 13.е, 19е, 36.е, 75е, 0.8w, 4w, 5w

#6 Purgen4ik

Purgen4ik

    Новичок

  • Пользователи
  • PipPip
  • 10
  • 10 сообщений
  • 0 thanks

Отправлено 08 November 2013 - 17:11

пробуйте так, поправил вам

нет, не робит.
возможен вариант, что платка эмулятора сдохла? или там не платка...

#7 sdtu2008

sdtu2008

    Продвинутый

  • Пользователи
  • 10
  • 680 сообщений
  • 0 thanks

Отправлено 08 November 2013 - 17:17

нет, не робит.
возможен вариант, что платка эмулятора сдохла? или там не платка...

после того как изменили параметр перегрузили эмулятор в ресивере?

#8 Purgen4ik

Purgen4ik

    Новичок

  • Пользователи
  • PipPip
  • 10
  • 10 сообщений
  • 0 thanks

Отправлено 08 November 2013 - 17:22

после того как изменили параметр перегрузили эмулятор в ресивере?

Конечно

#9 alserg

alserg

    Super Moderator

  • Модераторы
  • 267
  • 17426 сообщений
  • 44 thanks

Отправлено 08 November 2013 - 17:27

ньюкамд проирити игнор листы показывайте
и какой пакет смотреть собираетесь укажите

45948db45b33.gif

 

 

#10 Purgen4ik

Purgen4ik

    Новичок

  • Пользователи
  • PipPip
  • 10
  • 10 сообщений
  • 0 thanks

Отправлено 08 November 2013 - 17:36

ньюкамд проирити игнор листы показывайте
и какой пакет смотреть собираетесь укажите

Ignore:
# ignore irdeto chids, nova example:
I: { 00 28 }
I: { 00 15 }
I: { 00 13 }
# ignore viaccess providers
V: { 02 0A 10}
V: { 02 0A 20}
# ignore seca providers
S: { 00 72 }
S: { 00 84 }
# ignore caids
X: { 06 26 }

Priority:
# use this via prov first
V: { 00 78 00 }
# use this seca prov first
S: { 80 00 }
# use this caid first
X: ( 06 02 }

Newcamd:
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 12000
CWS = ru724.cserver.tv 3001 ***** 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # HTB+ ??????, ???????, ???????? ? HD
CWS = ru724.cserver.tv 3002 ***** 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # Tricolor TV(36e)
CWS = ru724.cserver.tv 3049 ***** 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # ??????

VIP (36e) ALL

Сообщение отредактировал alserg: 08 November 2013 - 17:41


#11 alserg

alserg

    Super Moderator

  • Модераторы
  • 267
  • 17426 сообщений
  • 44 thanks

Отправлено 08 November 2013 - 17:42

настройки наши возьмите
https://forum.zargac...ead.php?t=19404

45948db45b33.gif

 

 

#12 Purgen4ik

Purgen4ik

    Новичок

  • Пользователи
  • PipPip
  • 10
  • 10 сообщений
  • 0 thanks

Отправлено 08 November 2013 - 17:54

настройки наши возьмите
https://forum.zargac...ead.php?t=19404

Изменил, но - ничего.
А конфиги у меня правильно лежат в /var/keys ?

#13 svislochanin

svislochanin

    Super Moderator

  • Модераторы
  • 283
  • 12038 сообщений
  • 6 thanks

Отправлено 08 November 2013 - 17:58

да.
перегрузили?
Dreambox 800 se
4.8е, 13.е, 19е, 36.е, 75е, 0.8w, 4w, 5w

#14 Purgen4ik

Purgen4ik

    Новичок

  • Пользователи
  • PipPip
  • 10
  • 10 сообщений
  • 0 thanks

Отправлено 08 November 2013 - 18:00

да.
перегрузили?

Перезагрузил

Сообщение отредактировал Purgen4ik: 08 November 2013 - 18:02


#15 svislochanin

svislochanin

    Super Moderator

  • Модераторы
  • 283
  • 12038 сообщений
  • 6 thanks

Отправлено 08 November 2013 - 18:32

лог показывайте
Dreambox 800 se
4.8е, 13.е, 19е, 36.е, 75е, 0.8w, 4w, 5w

#16 Purgen4ik

Purgen4ik

    Новичок

  • Пользователи
  • PipPip
  • 10
  • 10 сообщений
  • 0 thanks

Отправлено 08 November 2013 - 18:42

лог показывайте

У меня его нет. По крайней мере там, где он должен быть, согласно инструкции по настройке mgcamd здесь на форуме. Или я не там ищу, не то ищу.

#17 alserg

alserg

    Super Moderator

  • Модераторы
  • 267
  • 17426 сообщений
  • 44 thanks

Отправлено 08 November 2013 - 18:45

https://forum.zargac...ead.php?t=19406
прочтите

45948db45b33.gif

 

 

#18 Purgen4ik

Purgen4ik

    Новичок

  • Пользователи
  • PipPip
  • 10
  • 10 сообщений
  • 0 thanks

Отправлено 08 November 2013 - 19:32

https://forum.zargac...ead.php?t=19406
прочтите

в процессах нет mgcamd. при попытке его запустить пишет:

root@et5x00:~# /usr/bin/mgcamd
/usr/bin/mgcamd: error while loading shared libraries: libcrypto.so.1.0.0: cannt open shared object file: No such file or directory

#19 alserg

alserg

    Super Moderator

  • Модераторы
  • 267
  • 17426 сообщений
  • 44 thanks

Отправлено 08 November 2013 - 19:34

перестановить пробуйте
может криво стал

45948db45b33.gif

 

 

#20 Purgen4ik

Purgen4ik

    Новичок

  • Пользователи
  • PipPip
  • 10
  • 10 сообщений
  • 0 thanks

Отправлено 08 November 2013 - 19:40

перестановить пробуйте
может криво стал

да как я только не пробовал: и с помощью мэнеджера плагинов, и с сайтов качал, заливал на флэшку устанавливал и с дсс. но, ок, попробую еще.
UPD Поставил другой(1.35(r-6)) - заработало.
Большое спасибо за отклик и помощь!

Сообщение отредактировал Purgen4ik: 08 November 2013 - 19:46





Количество пользователей, читающих эту тему: 0

0 пользователей, 0 гостей, 0 анонимных