Сообщений в теме: 1688

[burna]

Помогите разобраться!
на Дриме 800 SE при переключении на каналы Fox и Fox Life включается канал ТНВ. Настройки вроде все брал с форума.
В общем вот лог:
11:49:46 [mg0] -> ECM to newcamd serv16.zargacum.net:3001
11:49:47 [mg0] <- CW from newcamd serv16.zargacum.net:3001 (928ms)
11:49:47 [mg0] 928 msec -- Wed Sep 3 11:51:59 2014
11:49:47 system: Viaccess<010>caid: 0x0500<010>pid: 0x0fb5
11:49:47 prov: 040600
11:49:47 cw0:0 60 E8 05 4D B1 0B 4E 0A
11:49:47 cw1:0 12 52 41 A5 78 F4 56 C2
11:49:49 [mg0] stoping camd..
11:49:49 got 8 cmd 9F
11:49:50 got 54 cmd 9F
11:49:50 [mg0] namespace 1680000 t-id 8 on-id 70
11:49:50 [mg0] descramble on 8, source 3
11:49:50 [mg0] service 1 index 0 pmt pid 20 (195), pids: video 0x0140, audio 0x0111 0x0191 0x0192 0x0115
11:49:50 [mg0] No supported encryption system found
11:49:50 [mg0] stopped
11:50:08 [newcamd] Connection to serv8.zargacum.net:3002 failed (189000ms)
11:50:08 [mg0] stoping camd..
11:50:09 got 54 cmd 9F
11:50:09 [mg0] namespace 1680000 t-id 8 on-id 70
11:50:09 [mg0] descramble on 8, source 3
11:50:09 [mg0] service 1 index 0 pmt pid 20 (196), pids: video 0x0140, audio 0x0111 0x0191 0x0192 0x0115
11:50:09 [mg0] No supported encryption system found
11:50:09 [mg0] stopped

[alserg]

покажите настройки
и смените уже serv16.zargacum.net на новые сервера
и пересканируйте эти два канала Fox и Fox Life из пакета нтв+

[burna]

покажите настройки
и смените уже serv16.zargacum.net на новые сервера
и пересканируйте эти два канала Fox и Fox Life из пакета нтв+

Серв сменил на ru872.cserver.tv. - все также ТНВ
ИГНОР:
V: { 00 80 00}
V: { 00 81 10}
V: { 02 08 10}
V: { 02 17 00}
V: { 02 26 00}
V: { 02 2b 00}
V: { 02 37 00}
V: { 02 43 00}
V: { 02 51 00}
V: { 02 58 00}
V: { 03 07 00}
V: { 03 29 20}
V: { 04 06 10}
V: { 05 0B 00}
V: { 03 06 00}
V: { 04 21 00}
V: { 05 01 00}
V: { FF F8 90}
V: { 03 06 00}
V: { 05 0A 00}
X: { 4A E0 }
X: { 06 27 }
X: { 06 03 }
X: { 4A A1 }

ПРИОР:
V: { 04 06 00 }
V: { 04 06 20 }

Реплейс:
R:{{4E89}{0500}{040620}{106D}{0}{0}{0}} # Perviy kanal HD
R:{{4E8A}{0500}{040620}{106e}{0}{0}{0}} # Rossiya HD
R:{{6595}{0500}{040620}{106d}{0}{0}{0}} # TLC Russia HD
R:{{3716}{0500}{040620}{106a}{0}{0}{0}} # NTV Plus 3D
R:{{2F45}{0500}{040620}{1069}{0}{0}{0}} # HD Kino
R:{{4E86}{0500}{040620}{106a}{0}{0}{0}} # HD Kino 2
R:{{4E88}{0500}{040620}{106c}{0}{0}{0}} # MGM
R:{{6593}{0500}{040620}{106b}{0}{0}{0}} # Amedia Premium HD
R:{{6592}{0500}{040620}{106a}{0}{0}{0}} # National Geographic HD
R:{{3715}{0500}{040620}{1069}{0}{0}{0}} # Nat Geo Wild HD
R:{{3718}{0500}{040620}{106c}{0}{0}{0}} # Animal Planet HD
R:{{2F47}{0500}{040620}{106b}{0}{0}{0}} # HD Life
R:{{6594}{0500}{040620}{106c}{0}{0}{0}} # History HD
R:{{6596}{0500}{040620}{106e}{0}{0}{0}} # Travel Channel HD
R:{{4E87}{0500}{040620}{106b}{0}{0}{0}} # Sport 1 HD
R:{{2F46}{0500}{040620}{106A}{0}{0}{0}} # HD Sport
R:{{3719}{0500}{040620}{106d}{0}{0}{0}} # NTV PLUS Footbol HD
R:{{4E85}{0500}{040620}{1069}{0}{0}{0}} # NTV PLUS Footbol 2 HD
R:{{42CD}{0500}{040620}{1069}{0}{0}{0}} # Sport Hit HD
R:{{6591}{0500}{040620}{1069}{0}{0}{0}} # Nash Footbol HD
R:{{2F48}{0500}{040620}{106C}{0}{0}{0}} # EuroSport HD
R:{{2F4A}{0500}{040620}{106E}{0}{0}{0}} # MTV Live HD
R:{{3717}{0500}{040620}{106b}{0}{0}{0}} # Mezzo Live HD
R:{{371A}{0500}{040620}{106E}{0}{0}{0}} # Nickelodeon HD
R:{{42CE}{0500}{040620}{106A}{0}{0}{0}} # TV 1000 Comedy HD
R:{{42D0}{0500}{040620}{106C}{0}{0}{0}} # TV 1000 Premium HD
R:{{42CF}{0500}{040620}{106B}{0}{0}{0}} # TV 1000 Megahit HD
R:{{42D2}{0500}{040620}{106E}{0}{0}{0}} # Viasat Sport HD
R:{{42D1}{0500}{040620}{106D}{0}{0}{0}} # Viasat Nature/History HD
###############Tricolor TV 36E###############
R:{{697D}{4AE1}{000000}{004a}{0}{0}{0}} # Первый
R:{{6987}{4AE1}{000000}{004a}{0}{0}{0}} # НТВ
R:{{794A}{4AE1}{000000}{004a}{0}{0}{0}} # СТС
R:{{38E}{4AE1}{000000}{0029}{0}{0}{0}} # Рен ТВ
R:{{69B4}{4AE1}{000000}{0038}{0}{0}{0}} # Перец
R:{{398}{4AE1}{000000}{0030}{0}{0}{0}} # ТНТ
R:{{6982}{4AE1}{000000}{004a}{0}{0}{0}} # Россия 1
R:{{69DC}{4AE1}{000000}{0037}{0}{0}{0}} # ТВЦ
R:{{69AA}{4AE1}{000000}{0037}{0}{0}{0}} # Пятый канал
R:{{61B2}{4AE1}{000000}{0031}{0}{0}{0}} # Дом кино
R:{{61C6}{4AE1}{000000}{0031}{0}{0}{0}} # Домашний
R:{{7940}{4AE1}{000000}{0032}{0}{0}{0}} # Кинопоказ
R:{{61E4}{4AE1}{000000}{0031}{0}{0}{0}} # Комедия ТВ
R:{{389}{4AE1}{000000}{0029}{0}{0}{0}} # Comedy TV
R:{{61BC}{4AE1}{000000}{0031}{0}{0}{0}} # Много ТВ
R:{{7922}{4AE1}{000000}{0032}{0}{0}{0}} # Индия ТВ
R:{{6202}{4AE1}{000000}{0031}{0}{0}{0}} # Телепутешествия
R:{{7936}{4AE1}{000000}{0032}{0}{0}{0}} # Зоо ТВ
R:{{61DA}{4AE1}{000000}{0031}{0}{0}{0}} # ТТС
R:{{385}{4AE1}{000000}{0029}{0}{0}{0}} # Дождь
R:{{7972}{4AE1}{000000}{0032}{0}{0}{0}} # Подмосковье
R:{{69A0}{4AE1}{000000}{004a}{0}{0}{0}} # Россия 24
R:{{698C}{4AE1}{000000}{004a}{0}{0}{0}} # Россия К
R:{{6996}{4AE1}{000000}{004a}{0}{0}{0}} # Россия 2
R:{{7968}{4AE1}{000000}{0032}{0}{0}{0}} # Тонус ТВ
R:{{69F0}{4AE1}{000000}{0039}{0}{0}{0}} # Наш Футбол
R:{{61D0}{4AE1}{000000}{0031}{0}{0}{0}} # Автоплюс
R:{{7954}{4AE1}{000000}{0032}{0}{0}{0}} # Боец ТВ
R:{{3B}{4AE1}{000000}{0032}{0}{0}{0}} # Bridge TV
R:{{388}{4AE1}{000000}{0029}{0}{0}{0}} # Rusong TV
R:{{69E6}{4AE1}{000000}{0038}{0}{0}{0}} # Охотник и рыболов
R:{{61F8}{4AE1}{000000}{0031}{0}{0}{0}} # Спорт
R:{{5270}{0500}{040600}{0fa4}{0}{0}{0}} # Ю-ТВ
R:{{61EE}{4AE1}{000000}{0031}{0}{0}{0}} # Teen TV
R:{{61A8}{4AE1}{000000}{0031}{0}{0}{0}} # 365 дней
R:{{69BE}{4AE1}{000000}{0038}{0}{0}{0}} # TV Sale
R:{{6991}{4AE1}{000000}{004a}{0}{0}{0}} # Стиль и мода
R:{{391}{4AE1}{000000}{0029}{0}{0}{0}} # Раз ТВ
R:{{397}{4AE1}{000000}{0029}{0}{0}{0}} # Мир
R:{{38B}{4AE1}{000000}{0050}{0}{0}{0}} # Ночной клуб
R:{{38C}{4AE1}{000000}{0050}{0}{0}{0}} # Русская ночь
R:{{390}{4AE1}{000000}{0050}{0}{0}{0}} # Иcкушение


Конфиг:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 00 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 2 4

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 10 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 00 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 192.168.0.102
L: { 01 } 192.168.0.101 514 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 36000 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

Сообщение отредактировал alserg: 03 September 2014 - 10:29

[alserg]

поправил mg cfg
удалите этот канал
а 2 пересканируйте заново

[burna]

поправил mg cfg
удалите этот канал
а 2 пересканируйте заново

Не помогло!(

[alserg]

перейдите в онлайн в биллинге

[dreambox500]

У меня проблема. Дрим 500хд. Запускаю эмулятор а он не работает и при просмотре логов на дриме пишет fta or cannot decode. Что могло случится. До этого все работало .

[alserg]

настройки mg сfg проверьте
не поможет,переустановите мжкамд

[svislochanin]

У меня проблема. Дрим 500хд. Запускаю эмулятор а он не работает и при просмотре логов на дриме пишет fta or cannot decode. Что могло случится. До этого все работало .

Покажите полный лог

[ancad]

кардшаринг не работает
поставил вчера newnigma2_stable_dm800_v4.0.9-ramiMAHER
ради отт -работает
кардшаринг не работает - -пробовал mgcamd 1.3,1.35a,1.38
что подскажете?

[alserg]

наши настройки возьмите
https://forum.zargac...ead.php?t=19404
и параметр B в mg cfg какой стоит?
и ресивер в подпись внесите

[ancad]

B: { 00 }

[sniper]

B: { 06 } попробуйте

[svislochanin]

b: { 00 }

для дримбокса параметр 06 нужен

[ancad]

не помогло

[svislochanin]

не помогло

Рестартоните энигму

[ancad]

сделал рестарт не работает...

[alserg]

настройки остальные покажите

[ancad]

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 08 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 00

# network ecm timeout in seconds
K: { 02 }

# newcamd dead routes connect retry, sec
Q: { 10 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 07 } 127.0.0.1 514 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 11 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

[alserg]

остальные листы показывайте
и какие пакеты настраиваете?