не стартует MgCamd
#1
Отправлено 06 April 2012 - 19:47
#2
Отправлено 06 April 2012 - 20:30
Подскажите кто сталкивался, правил replace.list а потом закачал с помощью тотал командера, после этого перезагрузил ресивер. В процессах MgCamd через телнет виден. лог по лану и в файл неидёт.
mg_cfg покажите
4.8е, 13.е, 19е, 36.е, 75е, 0.8w, 4w, 5w
#3
Отправлено 06 April 2012 - 22:06
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 02 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 01 }
# network ecm timeout in seconds
K: { 07 }
# newcamd dead routes connect retry, sec
Q: { 10 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 01 } 90
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 04 } 192.168.1.34 514 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of m
# for openbox/elanvision users with remote shares make sense to set it higher th
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit,
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not
H: { 00 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 07 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 83 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 12 }
#4
Отправлено 06 April 2012 - 22:35
Сообщение отредактировал sniper: 06 April 2012 - 22:58
#6
Отправлено 07 April 2012 - 00:03
Сообщение отредактировал Priduronz: 07 April 2012 - 00:06
#8
Отправлено 07 April 2012 - 17:28
#9
Отправлено 05 May 2012 - 12:47
Подскажите кто сталкивался, правил replace.list а потом закачал с помощью тотал командера, после этого перезагрузил ресивер. В процессах MgCamd через телнет виден. лог по лану и в файл неидёт.
Ya stalkivalsya s takim sluchiymi,seychas ne pomnyu no znayu w papke var nado zayti w kakuyuta papku tam nahoditsya nazvaniye wseh plaginow i mojit byit s risunkami wse plaginy nado izmenit atributy na 755 i wse uwas wse srabotaet.
#11
Отправлено 01 June 2012 - 16:32
#13
Отправлено 16 July 2012 - 14:45
1.2.63.11й,30й сервер. ICQ - 615880043
http://www.speedtest.../1555821395.png
Что имеем - не храним; потерявши - плачем.
#14
Отправлено 16 July 2012 - 16:00
4.8е, 13.е, 19е, 36.е, 75е, 0.8w, 4w, 5w
#15
Отправлено 16 July 2012 - 18:35
спросите на форуме по вашему ресиверу http://openboxfan.com/index.php
на том форуме пока зарегистрируешся "с ума сойдеш" вроде зарегистрировался, пришло письмо--прежде чем войти или пользоватся форумом должен администратор одобрить типа регистрацию или что в етом роде, потом придет письмо, если одобрят, а потом только сможеш пользоватся форумом...
1.2.63.11й,30й сервер. ICQ - 615880043
http://www.speedtest.../1555821395.png
Что имеем - не храним; потерявши - плачем.
#16
Отправлено 04 January 2013 - 22:23
Подскажите, Mcamd, тип запуска стоит--Авто, но при включении тюнера в разделе Состояние не пишется что он Запущен, приходится заходить в плагины и вручную зеленой кнопкой Запуститиь он запускается, почему после включения он сам автоматом не запускается?
У меня точно такая же проблема! Перебробывал всё что можно... Может править нужно mg_cfg. Подскажите, как? Админы, выложите mg_cfg правильный для вашего биллинга. Спасибо.
#17
Отправлено 04 January 2013 - 22:27
у меня точно такая же проблема! перебробывал всё что можно... может править нужно mg_cfg. подскажите, как? админы, выложите mg_cfg правильный для вашего биллинга. спасибо.
тюнер у вас хоть какой?
4.8е, 13.е, 19е, 36.е, 75е, 0.8w, 4w, 5w
#18
Отправлено 05 January 2013 - 01:02
тюнер у вас хоть какой?
S6 Pro +
#19
Отправлено 05 January 2013 - 01:04
Количество пользователей, читающих эту тему: 0
0 пользователей, 0 гостей, 0 анонимных