Сообщений в теме: 1977

[admin]

пока частично!

[Sava52]

Canal Sat France идет с затыками:
Например W9 HD

Jul 01 11:00:00 192.168.1.101 ECM to newcamd 95.211.21.66:2001
Jul 01 11:00:00 192.168.1.101 [mg1] <- CW from newcamd 95.211.21.66:2001 (786ms)
Jul 01 11:00:00 192.168.1.101 [mg1] 786 msec -- Sun Jul 1 07:59:50 2012
Jul 01 11:00:00 192.168.1.101 ===== Viaccess ECM on CaID 0x0500, pid 0x196f ======
Jul 01 11:00:00 192.168.1.101 prov: 032830
Jul 01 11:00:00 192.168.1.101 cw0:1 D9 98 7A EB 96 1B A4 55
Jul 01 11:00:00 192.168.1.101 cw1:1 B0 21 F2 C3 B8 59 19 2A
Jul 01 11:00:10 192.168.1.101 ECM to newcamd 95.211.21.66:2001
Jul 01 11:00:11 192.168.1.101 [mg1] <- CW from newcamd 95.211.21.66:2001 (776ms)
Jul 01 11:00:11 192.168.1.101 [mg1] 776 msec -- Sun Jul 1 08:00:00 2012
Jul 01 11:00:11 192.168.1.101 ===== Viaccess ECM on CaID 0x0500, pid 0x196f ======
Jul 01 11:00:11 192.168.1.101 prov: 032830
Jul 01 11:00:11 192.168.1.101 cw0:1 35 1F CD 21 95 9C 7E AF
Jul 01 11:00:11 192.168.1.101 cw1:1 B0 21 F2 C3 B8 59 19 2A
Jul 01 11:00:20 192.168.1.101 ECM to newcamd 95.211.21.66:2001
Jul 01 11:00:23 192.168.1.101 ECM to newcamd 95.211.21.66:2001
Jul 01 11:00:27 192.168.1.101 ECM to newcamd 95.211.21.66:3026
Jul 01 11:00:27 192.168.1.101 [newcamd] no answer from 95.211.21.66:2001 for 4 sec
Jul 01 11:00:27 192.168.1.101 [mg1] newcamd route 95.211.21.66:3026 cant decode (95ms)
Jul 01 11:00:27 192.168.1.101 ECM to newcamd 95.211.21.66:3026
Jul 01 11:00:28 192.168.1.101 [mg1] newcamd route 95.211.21.66:3026 cant decode (89ms)
Jul 01 11:00:28 192.168.1.101 [newcamd] Connecting to 95.211.21.66:2001...
Jul 01 11:00:28 192.168.1.101 ECM to newcamd 95.211.21.66:3026
Jul 01 11:00:28 192.168.1.101 [mg1] newcamd route 95.211.21.66:3026 cant decode (90ms)
Jul 01 11:00:28 192.168.1.101 [newcamd] Login to 95.211.21.66:2001 as cVx63jFT7 accepted (62ms)
Jul 01 11:00:28 192.168.1.101 [newcamd] Card data from 95.211.21.66:2001 (121ms):
Jul 01 11:00:28 192.168.1.101 Userid 52 caid 500 providers 15
Jul 01 11:00:28 192.168.1.101 Idents: 024F00 023100 041700 032830 032500 043800 042700 032000 042800 042810 042200 042400 024700 023800 042300
Jul 01 11:00:28 192.168.1.101
Jul 01 11:00:29 192.168.1.101 ECM to newcamd 95.211.21.66:2001
Jul 01 11:00:33 192.168.1.101 ECM to newcamd 95.211.21.66:3026
Jul 01 11:00:33 192.168.1.101 [mg1] newcamd route 95.211.21.66:3026 cant decode (95ms)
Jul 01 11:00:33 192.168.1.101 ECM to newcamd 95.211.21.66:3026
Jul 01 11:00:33 192.168.1.101 [newcamd] no answer from 95.211.21.66:2001 for 4 sec
Jul 01 11:00:33 192.168.1.101 [mg1] newcamd route 95.211.21.66:3026 cant decode (91ms)
Jul 01 11:00:33 192.168.1.101 ECM to newcamd 95.211.21.66:3026
Jul 01 11:00:33 192.168.1.101 [mg1] newcamd route 95.211.21.66:3026 cant decode (94ms)
Jul 01 11:00:34 192.168.1.101 [newcamd] Connecting to 95.211.21.66:2001...
Jul 01 11:00:34 192.168.1.101 [newcamd] Login to 95.211.21.66:2001 as cVx63jFT7 accepted (66ms)
Jul 01 11:00:34 192.168.1.101 [newcamd] Card data from 95.211.21.66:2001 (140ms):
Jul 01 11:00:34 192.168.1.101 Userid 52 caid 500 providers 15
Jul 01 11:00:34 192.168.1.101 Idents: 024F00 023100 041700 032830 032500 043800 042700 032000 042800 042810 042200 042400 024700 023800 042300
Jul 01 11:00:34 192.168.1.101
Jul 01 11:00:35 192.168.1.101 ECM to newcamd 95.211.21.66:2001
Jul 01 11:00:37 192.168.1.101 [mg1] <- CW from newcamd 95.211.21.66:2001 (2314ms)
Jul 01 11:00:37 192.168.1.101 [mg1] WARNING, both cws changed !
Jul 01 11:00:37 192.168.1.101 [mg1] 2314 msec -- Sun Jul 1 08:00:26 2012
Jul 01 11:00:37 192.168.1.101 ===== Viaccess ECM on CaID 0x0500, pid 0x196f ======
Jul 01 11:00:37 192.168.1.101 prov: 032830
Jul 01 11:00:37 192.168.1.101 cw0:1 93 12 54 F9 3D 5D E3 7D
Jul 01 11:00:37 192.168.1.101 cw1:1 9D 5A B5 AC 8B F6 4C CD
Jul 01 11:00:40 192.168.1.101 ECM to newcamd 95.211.21.66:2001
Jul 01 11:00:41 192.168.1.101 [mg1] <- CW from newcamd 95.211.21.66:2001 (774ms)
Jul 01 11:00:41 192.168.1.101 [mg1] 774 msec -- Sun Jul 1 08:00:30 2012
Jul 01 11:00:41 192.168.1.101 ===== Viaccess ECM on CaID 0x0500, pid 0x196f ======
Jul 01 11:00:41 192.168.1.101 prov: 032830
Jul 01 11:00:41 192.168.1.101 cw0:1 93 12 54 F9 3D 5D E3 7D
Jul 01 11:00:41 192.168.1.101 cw1:1 AD FB 1F C7 18 72 43 CD

[alserg]

настройки покажите свои!

[Sava52]

Мой mg_cfg:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 00 }

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 2 4

# network ecm timeout in seconds
K: { 03 }

# newcamd dead routes connect retry, sec
Q: { 10 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 newcamd, camd3, radegast, cccamd, gbox
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 }

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 00 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 01 } 192.168.1.100 514

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 3600 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 12 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

[alserg]

приорити и игнор дайте еще

[Sava52]

я где-то прочитал, что для опена они не нужны и потому их у меня нет. все шло без затыков. дня три-четыре назад стали затыки и на d+ еще. а на вип реально сделать приорити и игнор?

[alserg]

реально конечно сделать
https://forum.zargac...wthread.php?t=8
смотрите

[mozoos]

mozoos параметр К в mg_cfg какой?

# network ecm timeout in seconds
K: { 02 }

[sniper]

cw from newcamd 93.84.116.41:3002 (2763ms) - как минимум K: { 03 }

[alserg]

и сервер попробуйте подобрать возможно другой,с меньшим откликом

[hotovyrado1]

Пожалуйста, обратите внимание на Skylink. HD каналов нет - да SD

это не будет работать через CCCam а также MGCamd

Сообщение отредактировал hotovyrado1: 01 July 2012 - 15:33

[sniper]

лог работы покажите

[hotovyrado1]

где его найти? Dreambox DM800...спасибо

[hatul]

конкретные затыки на Кабель Киоск


[ 12:07:04.610 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:07:08.810 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:07:13.010 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:07:14.136 ] [mg1] <- CW from newcamd serv18.zargacum.net:3018 (1125ms)
[ 12:07:14.137 ] [mg1] 1125 msec -- Sun Jul 1 12:07:14 2012
[ 12:07:14.137 ] ===== Conax ECM on CaID 0x0B00, pid 0x04cb ======
[ 12:07:14.138 ] prov: 000000
[ 12:07:14.138 ] cw0:1 E8 4A 26 58 F1 71 95 F7
[ 12:07:14.138 ] cw1:1 05 80 00 85 96 66 68 64
[ 12:07:19.011 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:07:22.014 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:07:26.210 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:07:30.310 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:07:31.331 ] [mg1] <- CW from newcamd serv18.zargacum.net:3018 (1019ms)
[ 12:07:31.331 ]
[mg1] WARNING, both cws changed !
[ 12:07:31.332 ] [mg1] 1019 msec -- Sun Jul 1 12:07:31 2012
[ 12:07:31.333 ] ===== Conax ECM on CaID 0x0B00, pid 0x04cb ======
[ 12:07:31.333 ] prov: 000000
[ 12:07:31.333 ] cw0:1 22 DC 28 26 55 86 EB C6
[ 12:07:31.334 ] cw1:1 00 1F 0D 2C 2F 01 80 B0
[ 12:07:39.011 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:07:42.016 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:07:46.210 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:07:50.410 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:07:51.715 ] [mg1] <- CW from newcamd serv18.zargacum.net:3018 (1304ms)
[ 12:07:51.716 ]
[mg1] WARNING, both cws changed !
[ 12:07:51.717 ] [mg1] 1304 msec -- Sun Jul 1 12:07:51 2012
[ 12:07:51.717 ] ===== Conax ECM on CaID 0x0B00, pid 0x04cb ======
[ 12:07:51.717 ] prov: 000000
[ 12:07:51.718 ] cw0:1 DB 66 81 C2 0D 38 D4 19
[ 12:07:51.718 ] cw1:1 3A 5E 70 08 A8 E0 4F D7
[ 12:07:59.010 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:08:02.012 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:08:06.210 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:08:10.411 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:08:13.478 ] [mg1] <- CW from newcamd serv18.zargacum.net:3018 (3066ms)
[ 12:08:14.611 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:08:14.697 ] [mg1] <- CW from newcamd serv18.zargacum.net:3018 (85ms)
[ 12:08:14.698 ]
[mg1] WARNING, both cws changed !
[ 12:08:14.699 ] [mg1] 85 msec -- Sun Jul 1 12:08:14 2012
[ 12:08:14.699 ] ===== Conax ECM on CaID 0x0B00, pid 0x04cb ======
[ 12:08:14.700 ] prov: 000000
[ 12:08:14.700 ] cw0:1 D5 F3 EB B3 15 2E D5 18
[ 12:08:14.700 ] cw1:1 A4 27 B8 83 56 0A 29 89
[ 12:08:19.012 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:08:21.093 ] [mg1] <- CW from newcamd serv18.zargacum.net:3018 (2080ms)
[ 12:08:21.094 ] [mg1] 2080 msec -- Sun Jul 1 12:08:21 2012
[ 12:08:21.094 ] ===== Conax ECM on CaID 0x0B00, pid 0x04cb ======
[ 12:08:21.094 ] prov: 000000
[ 12:08:21.095 ] cw0:1 6D 73 CB AB 85 21 AE 54
[ 12:08:21.095 ] cw1:1 A4 27 B8 83 56 0A 29 89
[ 12:08:29.012 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:08:32.015 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:08:36.211 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:08:40.412 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:08:44.612 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:08:48.812 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:08:52.913 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:08:57.112 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:09:01.313 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018
[ 12:09:02.340 ] [mg1] <- CW from newcamd serv18.zargacum.net:3018 (1026ms)
[ 12:09:02.340 ]
[mg1] WARNING, both cws changed !
[ 12:09:02.341 ] [mg1] 1026 msec -- Sun Jul 1 12:09:02 2012
[ 12:09:02.341 ] ===== Conax ECM on CaID 0x0B00, pid 0x04cb ======
[ 12:09:02.341 ] prov: 000000
[ 12:09:02.342 ] cw0:1 BD DF 51 ED 1C A7 12 D5
[ 12:09:02.342 ] cw1:1 FA A6 72 12 E5 4A A8 D7
[ 12:09:09.009 ] [mg1] -> ECM to newcamd serv18.zargacum.net:3018

[sniper]

где его найти? Dreambox DM800...спасибо

здесь смотрите https://forum.zargac...ead.php?t=17379

[lv_pavel]

Если у тебя Mgcamd - качни программу с 5 поста https://forum.zargac...ead.php?t=17379 , если Oscam - в адресной строке браузера введи ip ресивера:8888 и в конце страницы увидишь лог

[sniper]

hatul какой параметр К в mg_cfg установлен?

[hotovyrado1]

Спасибо, но я не буду устанавливать другие программы на компьютере. Skylink меня до сих пор все работает, и я ничего не изменило с ним, Но сегодня играть только SD программ

Мой компьютер является собственностью моего работодателя, я не могу запускать программы :-(

Сообщение отредактировал hotovyrado1: 01 July 2012 - 17:50

[sniper]

hotovyrado1 программа работает с любого диска, должна и с флешки работать.

[hatul]

hatul какой параметр к в mg_cfg установлен?

k: { 03 }

сейчас посмотрел-работает без проблем .хотя честно скажу- уже слабо расчитывал на полноценный просмотр данного пакета.
в общем спасибо-доволен

вот с момента этого сообщения от 18 июня до сегодняшнего дня смотрел без проблем